We will be happy to give you more information on how to use the equipment and facilities in your holiday home at Park Weideduyn.

Step 1: Behind the gas fire, on the wall, is the on/off button for the gas supply. Make sure the knob is horizontal, i.e. in position: OPEN

Step 2: Next, open the gas fire valve, in this there are 2 buttons. The left knob is not important, it can be in any position to get the fire going again. Turn the right knob all the way to the right.

Step 3: Turn the right knob a little to the left (towards the ignition sign) and hold the knob down until you see the pilot light go on at the bottom right of the stove.

Step 4: Then keep the knob depressed for about 5 more seconds and turn it further to the left to the small flame. Check that the pilot light is still burning.

Step 5: Then turn the right knob to the large flame - position, this will switch on the gas fire.

Here you will find information about the parasol and instructions for use.

We are happy to give you more information about using the whirlpool at your holiday home at Park Weideduyn (if applicable).

House rules for the whirlpool

• Showering is obligatory before use, feet must be clean
• Eating and/or drinking in the whirlpool is not allowed
• Do not use products such as make-up, sun cream, shampoo or bath oil immediately before or while using the whirlpool
• It is forbidden to sit/stand on the lid
• A maximum of 4 persons are allowed in the whirlpool
• Children are only allowed under adult supervision
• It is forbidden to dive in the whirlpool
• Pets are not allowed in the whirlpool
• Glassware, sharp metals or objects and electrical attributes are not allowed in the whirlpool
• Alcohol, drugs or medicines with narcotic side effects are not allowed when using the whirlpool
• Do not enter the whirlpool during rain and/or thunderstorms
• Do not enter the whirlpool if you are infected with the Corona virus
• If you are pregnant, consult a doctor if you can use the whirlpool
• The whirlpool may not be used after 10 p.m. because of noise pollution
• The whirlpool is heated to a temperature of 38 degrees. This is the maximum temperature to keep the PH/Chloro value good. If you have already used the whirlpool a few times, water may have been lost. It is important to make sure the water level is at the level of the bottom of the neck cushion at all times. There is a sensor here, which ensures that the whirlpool maintains its temperature.
• You can refill the whirlpool with tap water yourself, if necessary. When you are not using the whirlpool, keep the lid closed.
• During your stay, technical staff may come by to check the whirlpool for values.

Before using the sauna, read the instructions carefully.

Step 1: On top of the control panel, there is a slide button. Make sure the button is positioned to the right.

Step 2: Next, press and hold the power button, located at the front, for 5 seconds.

SAUNA MANUAL PDF >

* If using the shower in the basement please turn on the ventilation.